SYS-2029BT-HNC0R | Supermicro BigTwin 2029BT-HNC0R

Advantages:

special highlight

Up to 6TB RAM per Node

€4,970.00 *

Do you need help?
Your contact person:

Gunnar Dietrich

Sales

Configuration not found? Please use our server request form!

SYS-2029BT-HNC0R - 4 nodes on 2U with support up to 6TB RAM and 4 NVMe per node 4 Nodes... more

SYS-2029BT-HNC0R Produktinformationen

4 Nodes

Per Node

Motherboard:
Super X11DPT-B

CPU:
Dual Socket P (LGA 3647) Intel Xeon Scalable CPU 2nd Gen.
Up to 28 Cores, 205W TDP

RAM:
24 DIMM slots, up to 6TB DDR4-2933MHz 3DS ECC RDIMM/LRDIMM
supports Intel Optane DCPMM

LAN:
1 RJ45 Dedicated IPMI LAN Port

PCIe slots:
2 PCI-E 3.0 x16 Slots

Storage:
4 hot-swap NVMe 2.5" slots
2 Hot-swap SAS3 2.5" slots

Datasheet for Supermicro SYS-2029BT-HNC0R

Processor/Cache (per Node)
CPU	Dual Socket P (LGA 3647) 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ‡ , Dual UPI up to 10.4GT/s Support CPU TDP 70-205W *
Cores	Up to 28 Cores
Note	* 200W/205W CPUs are supported under certain configurations. Please contact Supermicro Technical Support for additional information about specialized system optimization
Note	‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R). Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Supermicro Technical Support for additional information.

System Memory (per Node)
Memory Capacity	24 DIMM slots Up to 6TB 3DS ECC DDR4-2933MHz † RDIMM/LRDIMM Supports Intel® Optane™ DCPMM ††
Memory Type	2933 † /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note	† 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro †† Cascade Lake only. Contact your Supermicro sales rep for more info.

On-Board Devices
Chipset	Intel® C621 chipset
SAS	SAS3 (12Gbps) via Broadcom 3008; IT mode
Network	Must bundle with at least one SIOM network card
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video	ASPEED AST2500 BMC

Input / Output (per node)
LAN	1 RJ45 Dedicated IPMI LAN port
USB	2 USB 3.0 ports (rear)
Video	1 VGA port
DOM	1 Super DOM (Disk on Module) port
Others	M.2 and SATA DOM for boot drive only

System BIOS
BIOS Type	AMI 32Mb SPI Flash ROM

Management
Software	Intel® Node Manager IPMI 2.0 KVM with dedicated LAN SSM , SPM , SUM SuperDoctor® 5 Watch Dog
Power Configurations	ACPI / APM Power Management

PC Health Monitoring
CPU	Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator
Fan	Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment Thermal Control for fan connectors

Chassis
Form Factor	2U Rackmount
Model	CSE-217BHQ+-R2K22BP2

Dimensions and Weight
Width	17.6" (447mm)
Height	3.47" (88mm)
Depth	28.75" (730mm)
Package	24.65" (H) x 9.76" (W) x 45.28" (D)
Weight	Gross Weight: 85 lbs (38.6kg) Net Weight: 54.5 lbs (24.7 kg)
Available Colors	Black

Front Panel
Buttons	Power On/Off button UID button
LEDs	Power status LED HDD activity LED Network activity LEDs Universal Information (UID) LED

Expansion Slots (per node)
PCI-Express	2 PCI-E 3.0 (x16) Low-profile slots 1 SIOM card support (must bundle with network card)

Drive Bays / Storage (per Node)
Hot-swap	6 Hot-swap 2.5" SAS3 drive bays or 4 NVMe + 2 SAS3 Hot-swap 2.5" Please contact Supermicro Technical Support for additional information about HDD and SSD if mixed. Some restrictions and configuration rules that apply to SSD are different from HDD.
M.2	2 M.2 NVMe or SATA (2240/2260/2280) via optional AOC-SMG3-2H8M2-B

System Cooling
Fans	4 Heavy duty 8cm PWM fans with air shroud

Power Supply
Total Output Power	1200W/1800W/1980W/2090/2200W
Dimension (W x H x L)	45 x 40 x 480 mm
Input	1200W: 100-127Vac / 50-60Hz 1800W: 200-220Vac / 50-60Hz 1980W: 220-230Vac / 50-60Hz 2090W: 230-240Vac / 50-60Hz 2090W: 180-220Vac (for UL/cUL only) 2200W: 220-240Vac (for UL/cUL only) 2090W: 230-240Vdc (for CCC only)
+12V	Max: 100A / Min: 0A (100-127Vac) Max: 150A / Min: 0A (200-220Vac) Max: 165A / Min: 0A (220-230Vac) Max: 174.17A / Min: 0A (230-240Vac) Max: 174.17A / Min: 0A (180-220Vac, UL/cUL only) Max: 183.33A / Min: 0A (220-240Vac, UL/cUL only) Max: 174.17A / Min: 0A (230-240Vdc, CCC only)
12Vsb	Max: 2.1A / Min: 0A
Output Type	Gold Finger
Certification	Titanium Level [ Test Report ]

Operating Environment
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)