SSG-6049P-E1CR45H

Advantages:

special highlight

Rack Storage Server

for 45 x 3.5" HDD

€3,883.00 *

Do you need help?
Your contact person:

Mareike Montens

Sales

Configuration not found? Please use our server request form!

SuperStorage SSG-6049P-E1CR45H Barebone Server system - 7 HW RAID levels ... more

SSG-6049P-E1CR45H Product Information

Mainboard:
Supermicro X11DSC+

CPU:
Dual socket P (LGA 3647), Intel Xeon Scalable
Up to 28 cores, support 70-205W TDP

RAM:
24 DIMM slots, up to 6TB DDR4-2933MHz ECC
Supports for Intel Optane DCPMM

LAN:
1 RJ45 dedicated IPMI LAN port

PCIe slots:
2 PCI-E 3.0 x16 slots
1 PCI-E 3.0 x8 slot
1 SIOM card support (essential bundle with network card)

Storage:
45 Hot-swap 3.5" SAS3/SATA3 drive bays
2 Hot-swap 2.5" SATA3 drive bays (rear)
Optional: 6 NVMe bays, 2 M.2 NVMe

Processor/Cache
CPU	Dual Socket P (LGA 3647) 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡, 3 UPI up to 10.4GT/s Support CPU TDP 70-205W
Cores	Up to 28 Cores
Note	^‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)

System Memory
Memory Capacity	24 DIMM slots Up to 6TB 3DS ECC DDR4-2933MHz^† RDIMM/LRDIMM Supports Intel® Optane™ DCPMM^††
Memory Type	2933^†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note	^† 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro ^†† Cascade Lake only.

On-Board Devices
Chipset	Intel® C621 chipset
SAS	SAS3 (12Gbps) via Broadcom 3108; HW RAID RAID 0, 1, 5, 6, 10, 50, 60
SATA	SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics	ASPEED AST2500 BMC

System BIOS
BIOS Type	AMI UEFI

Management
Software	Intel® Node Manager IPMI 2.0 NMI SPM, SUM SuperDoctor® 5 Watchdog

PC Health Monitoring
CPU	Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator
FAN	Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment Thermal Control for fan connectors

Chassis
Form Factor	4U Rackmount
Model	CSE-946LTS-R1K66P1

Front Panel
Buttons	Power On/Off button System Reset button
LEDs	Power status LED Hard drive activity LED Network activity LEDs System Information LED Power fail LED

Expansion Slots
PCI-Express	2 PCI-E 3.0 x16 slots 1 PCI-E 3.0 x8 slot 1 card support (must bundle with network card)

Drive Bays
Hot-swap	45 Hot-swap 3.5" SAS3/SATA3 drive bays 2 Rear Hot-swap 2.5" SATA drive bays
Optional	6 NVMe bays

Backplane
SAS3/SATA3 single expander per backplane

System Cooling
Fans	5 Hot-swap 8cm rear exhaust PWM fans

Power Supply 1600W 1U Redundant Power Supplies with PMBus
Total Output Power	1000W: 100 – 127Vac 1600W: 200 – 240Vac
Dimension(W x H x L)	73.5 x 40 x 265 mm
Input	100-127Vac / 12.9A Max / 50-60Hz 200-240Vac / 9.5A Max / 50-60Hz
+12V	Max: 82A / Min: 0.1A (100-127Vac) Max: 132A / Min: 0.1A (200-240Vac)
12V SB	Max: 2A / Min: 0.2A
Output Type	25 Pairs Gold Finger Connector
Certification	Platinum Level [ Test Report ]

Operating Environment
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

Order Information
Manufacturer SKU	SSG-6049P-E1CR45H
System Building	SSG-6049P-E1CR45H configured by Supermicro as Complete System