Happyware BA-SXE35-MFNV3-VBO | Single Xeon Mid-Tower Workstation
Advantages:
- Data integrity in all operating conditions
- Stable, software-controlled high availability
- Intuitive user interface
- Clear licensing system
- Administration via remote access
- Hardware, software & support included
- Manufacturer: Happyware
-
Order number:
BA-SXE35-MFNV3-VBO
-
Manufacturer SKU:
VX-SXE35-MFNV3-VBO
Configuration not found? Please use our server request form!
VX-SXE35-MFNV3-VBO Product Information
Happyware VivaWorx BA-SXE35-MFNV3-VBO: Collax V-Bien Office Appliance, the complete package of 2 nodes for virtualization and high availability
Hardware (per Node):
CPU:
Intel Xeon E-2334
4 Cores / 8 Threads
3.4 GHz - 4.8 GHz
RAM:
32GB RAM DDR4-3200MHz ECC unbuffered
LAN:
4x 1GbE RJ45 LAN ports (2 of which are occupied by redundant interconnect of the two nodes)
Storage:
4x 2.5" hot-swap SATA drive bays
Peripheral Drives:
2x 5.25 External HDD
Cost-effective entry-level variant
Collax V-Bien Office was developed for the requirements of small medical practices and freelancers. Collax V-Bien Office has the same range of functions as Collax V-Bien, but works with more cost-effective, but also power-saving hardware. Virtualization and high availability is thus no longer only available to larger companies. Your data is available and secure at all times. The hardware is designed for quiet operation, so it can also be used in noise-sensitive areas without any problems.
Security and high availability
Collax V-Bien Office is composed of two identical units. A failure is thus intercepted, all company servers remain in operation. Thanks to the patented Collax Fencing Device, server availability can be maintained even if there is a sudden failure of one unit. If, on the other hand, a failure is imminent, Proactive HA becomes active and evacuates the node as a precaution.
Virtual networking
Collax V-Bien Office offers the possibility to create multiple virtual networks. Built-in network interfaces are additionally supported via virtual switches. Network infrastructures can thus be replicated virtually as desired.
Complete package
Collax V-Bien combines all necessary components in only one solution. This saves costs and simplifies maintenance.
Simple administration
The two Collax V-Bien Office Nodes are administered like a single server. The user interface can be operated via browser, all settings can be made remotely, status information and statistics can be retrieved. The virtualized servers and their backups can also be managed remotely.
Efficient utilisation of existing resources
In regular operation, both units of Collax V-Bien Office are used to distribute the load of the servers. Only in the event of a fault do the virtualized servers have to move closer together.
In live operation
Once the two Collax V-Bien Office nodes have been set up, existing servers can simply be moved over the network. After that, they are highly available without further adjustment. If Collax V-Bien Office detects a defect, it informs the person responsible. At the same time, it ensures that this unit is no longer in use. Once the defect has been repaired, Collax V-Bien Office returns to redundant operation.
SKU Overview | ||
---|---|---|
BA-SXE35-MFNV3 | Intel Xeon E-2334 CPU, 32GB RAM, 4x 2.5" Hot-Swap + 2x 5.25 HDD, 2x 1GbE LAN, 1x 900W Multi-output single PSU | |
BA-SXE35-MFNV3-R | Intel Xeon E-2334 CPU, 32GB RAM, 4x 2.5" Hot-Swap + 2x 5.25 HDD, 2x 1GbE LAN,2x 600W Multi-output redundant PSUs |
Datasheet for Happyware VivaWorx BA-SXE35-MFNV3-VBO
Processor | |
---|---|
CPU | Intel Xeon E-2334 3.4GHz-4.8GHz |
Cores | 4 cores / 8 threads |
System Memory | |
---|---|
Memory Capacity | 32GB ECC UDIMM, DDR4-3200MHz |
Memory Type | 3200MHz SDRAM |
Memory Voltage | 1.2V |
Error Detection | Corrects single-bit errors |
On-Board Devices | |
---|---|
Chipset | Intel® C252 |
SATA | Intel® C252 controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10 |
IPMI | ASPEED AST2600 BMC |
Graphics | ASPEED AST2600 BMC |
Network Controllers | Dual LAN with 1GbE with Intel® I210 |
Input / Output | |
---|---|
SATA | 6 SATA3 (6Gbps) ports |
LAN | 2 1GbE LAN ports |
USB | 4 USB 2.0 ports (2 rear; 2 via header) 5 USB 3.2 Gen1 ports (2 via header; 2 rear; 1 type A) |
Video | 1 VGA D-Sub Connector port |
Serial Port | 2 COM ports (1 header; 1 rear) |
DOM | 2 SuperDOM (Disk on Module) power connector |
TPM | 1 TPM Header |
System BIOS | |
---|---|
BIOS Type | 256MB UEFI |
BIOS Features | ACPI 6.0 SMBIOS 3.3 Plug and Play (PnP) RTC (Real Time Clock) Wakeup UEFI 2.7 USB Keyboard support PCI 3.0 |
Management | |
---|---|
Software | SuperDoctor® 5 SUM SPM SSM IPMI 2.0 Watchdog |
System Management Software | IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support |
Power Configurations | Power-on mode for AC power recovery ACPI Power Management |
PC Health Monitoring | |
---|---|
Voltage | VBAT, System level control, Supports system management utility, Monitors CPU voltages, Chipset Voltage, Chassis intrusion header, 6 -fan status, 3.3V standby, +5V standby, +5V, +3.3V, +12V, +1.8V, Memory Voltages |
LED | UID/Remote UID BMC/IPMI Heartbeat LED |
Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Monitor 2 (TM2) support PECI |
Fan | 6x 4-pin fan headers (up to 6 fans) Thermal control tachometer fan connectors Fan speed control 6 fans with tachometer status monitoring Overheat LED indication |
Other Features | WOL, UID, M.2 NGFF connector, Dual Cooling Zones, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, Chassis intrusion detection, ACPI power management |
Chassis | |
---|---|
Form Factor | Mid-Tower |
Dimensions and Weight | |
---|---|
Height | 42.41 cm (424 mm) |
Width | 19.30 cm (193 mm) |
Depth | 52.52 cm (525 mm) |
Gross Weight | 30 lbs (13.61 kg) |
Net Weight | 28 lbs (12.7 kg) |
Packaging (W x H x L) | 54.30 cm (543 mm) x 30.40 cm (304 mm) x 64.21 cm (642 mm) |
Available Color | Black |
Front Panel | |
---|---|
Buttons | Power On/Off button |
LEDs | Power status LED HDD activity LED 1 Network activity LEDs System Overheat LED |
Port | 2x USB 2.0 Ports 2x USB 3.0 Ports 2x HD/AC97 Audio ports |
Expansion Slots | |
---|---|
PCI-Express | 1 PCI-E 4.0 x8 1 PCI-E 3.0 x2 (in x4-SLot) |
Drive Bays / Storage | |
---|---|
Fixed | 4x 2.5" SATA only |
M.2 |
M.2 Interface: 1 PCI-E 3.0 x4 |
Peripheral Drives | |
---|---|
System Cooling | |
---|---|
Fans | 1x fan + 1x cooling fan — optional |
Power Supply | |
---|---|
1x PS2/ATX 900W multiple outputs power supply 2x 600W redundant PSUs — for SKU BA-SXE35-MFNV3-R |
|
Dimensions (L x W x H) | 190 x 150 x 86 mm |
Total Output Power and Input | 900W with Input 100 - 240Vac |
AC Input Frequency | 50-60Hz |
Output Type | 24pin ATX |
-12V | Max: 0.5A / Min: 0A |
+12V | Max: 25A / Min: 0.1A (100Vac - 240Vac) Max: 25A / Min: 0.1A (100Vac - 120Vac) |
+5V | Max: 25A / Min: 0A |
+3.3V | Max: 25A / Min: 0A |
+5Vsb | Max: 4A / Min: 0.02A |
Power Efficiency | 90% |
Certification | 80 PLUS Gold Certified |
Regulatory (Power Supply) | |
---|---|
Power Supply Safety / EMC | BSMI CCC CE/EMC FCC class B TUV/CB UL/CUL |
Order Information | ||
---|---|---|
Manufacturer SKU | BA-SXE35-MFNV3 | |
System Building | BA-SXE35-MFNV3 configured by Happyware as Complete System |