Gigabyte R282-Z97 | Dual AMD EPYC 2U Rack Server
Advantages:
- Networking
- Technical Computing
- HPC
- Data Analytics
special highlight
Compatible w/ Tri-Mode NVMe Storage Adapters
- Manufacturer: Gigabyte
-
Order number:
1251181
-
Manufacturer SKU:
6NR282Z97MR-00
Configuration not found? Please use our server request form!
6NR282Z97MR-00 Product Information
Gigabyte R282-Z97 (6NR282Z97MR-00): 2U AMD EPYC Server compatible with Tri-Mode NVMe storage adapters and upgradeable up to 24x 2.5" drive bays
Mainboard:
Gigabyte MZ92-FS2 Rev. 3.0
CPU:
Dual Socket SP3, AMD EPYC™ 7003 with AMD 3D V-Cache™ Technology
Up to 64 cores/128 Threads, supports up to 280W TDP
RAM:
32x DIMM slots, up to 8TB RAM DDR4-3200MHz
8-Channel memory architecture
LAN:
2x 1GbE LAN ports (1 x Intel® I350-AM2)
1x 10/100/1000 management LAN
Expansion slots:
8x PCI-E 4.0 slots
1x OCP 3.0 Mezzanine slot
1x OCP 2.0 Mezzanine slot
M.2:
1x M.2 slot, PCI-E 4.0 x4, supports NGFF-2242/2260/2280/22110 cards, M-key
Storage:
12x 2.5" SATA/SAS hot-swap drive bays (front)
Upgradable up to 24x 2.5" NVMe hot-swap drive bays
2x 2.5" SATA hot-swap drive bays (rear)
Datasheet for Gigabyte R282-Z97 (6NR282Z97MR-00)
| Dimensions (WxHxD, mm) | 2U 438 x 87 x 730 |
|
| Motherboard | MZ92-FS2 Rev. 3.0 | |
| CPU | AMD EPYC™ 7003 processors with AMD 3D V-Cache™ Technology AMD EPYC™ 7003 series processor family Dual processors, 7nm, Socket SP3 Up to 64-core, 128 threads per processor cTDP up to 280W* Note: CPU TDP is limited to 225W if using M.2 device NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable Compatible with AMD EPYC™ 7002 series processor family |
|
| Socket | SP3 | |
| Chipset | System on Chip | |
| Memory |
32 x DIMM slots |
|
| LAN | 2 x 1GbE LAN ports (1 x Intel® I350-AM2) 1 x 10/100/1000 management LAN |
|
| Video | Integrated in Aspeed® AST2600 2D Video Graphic Adapter with PCIe bus interface 1920x1200@60Hz 32bpp, DDR4 SDRAM |
|
| Audio | N/A | |
| Storage | Front side: Default setting: 12 x 2.5" SATA/SAS hot-swappable HDD/SSD bays Upgradable for 24 x 2.5" Gen4 NVMe hot-swappable SSD bays Rear side: 2 x 2.5" SATA hot-swappable HDD/SSD bays, from onboard SATA signals SAS card is required for SAS devices support 1 x M.2 slot: - M-key - PCIe Gen4 x4 - Supports NGFF-2242/2260/2280/22110 cards - CPU TDP is limited to 225W if using M.2 device |
|
| SAS | Depends on SAS card | |
| RAID | Depends on SAS card | |
| Peripheral Devices | N/A | |
| Expansion Slots | Riser Card CRS2027: - 2 x PCIe x8 slot (Gen4 x8), Low profile half-length, available for Tri-Mode NVMe Storage Adapters Riser Card CRS2033: |
|
| Internal I/O | 1 x M.2 slot 1 x USB 3.0 header 1 x COM header 1 x TPM header 1 x Front panel header 1 x HDD back plane board header 1 x IPMB connector 1 x Clear CMOS jumper 1 x BIOS recovery jumper |
|
| Front I/O | 2 x USB 3.0 1 x Power button with LED 1 x ID button with LED 1 x Reset button 1 x NMI button 1 x System status LED 1 x HDD activity LED 2 x LAN activity LEDs |
|
| Rear I/O | 2 x USB 3.0 1 x VGA 2 x RJ45 1 x MLAN 1 x ID button with LED |
|
| Backplane I/O | Front side_CBP20O9: 24 x SATA/SAS/Gen4 NVMe ports Rear side_CBP2022: 2 x SATA/SAS ports Speed and bandwidth: SATA 6Gb/s, SAS 12Gb/s or PCIe Gen4 x4 per port |
|
| TPM | 1 x TPM header with SPI interface Optional TPM2.0 kit: CTM010 |
|
| Power Supply | 2 x 1600W redundant PSUs 80 PLUS Platinum AC Input: - 100-120V~/ 12A, 50-60Hz - 200-240V~/ 10.0A, 50-60Hz DC Input: 240Vdc, 10A DC Output: - Max 1000W/ 100-120V~ +12V/ 81.5A +12Vsb/ 2.5A - Max 1600W at 200-240V or 240Vdc Input +12V/ 133A +12Vsb/ 2.5A |
|
| System Management | Aspeed® AST2600 management controller GIGABYTE Management Console (AMI MegaRAC SP-X) web interface Dashboard HTML5 KVM Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.) Sensor Reading History Data FRU Information SEL Log in Linear Storage / Circular Storage Policy Hardware Inventory Fan Profile System Firewall Power Consumption Power Control LDAP / AD / RADIUS Support Backup & Restore Configuration Remote BIOS/BMC/CPLD Update Event Log Filter User Management Media Redirection Settings PAM Order Settings SSL Settings SMTP Settings |
|
| OS Compatibility | Windows Server 2016 (X2APIC/256T not supported) Windows Server 2019 Windows Server 2022 Red Hat Enterprise Linux 8.3 (x64) or later Ubuntu 18.04.5 LTS (x64) or later VMware ESXi 6.7 Update3 P03 or later Citrix Hypervisor 8.2.0 or later |
|
| System Fans |
4 x 80x80x38mm (16,300rpm) |
|
| Operating Properties | Operating temperature: 10°C to 35°C Operating humidity: 8%-80% (non-condensing) Non-operating temperature: -40°C to 60°C Non-operating humidity: 20%-95% (non-condensing) |
|
| Packaging Dimensions | 982 x 588 x 268 (mm) | |
| Packaging Content | 1 x R282-Z97 system 2 x CPU heatsinks 1 x Rail kit |
|
| Part Numbers | Barebone package: 6NR282Z97MR-00 Rev. A00 Spare parts: - Motherboard: 9MZ92FS2NR-00 - Rail kit: 25HB2-3A0202-K0R - CPU heatsink: 25ST1-15320E-J1R - Back plane board_24-port: 9CBP20O9NR-00 - Back plane board_2-port: 9CBP2022NR-00 - Front panel board: 9CFP2001NR-00 - Fan module: 25ST2-883829-D0R - Power supply: 25EP0-216008-L0S - Riser card - CRS2027: 9CRS2027NR-00 - Riser card - CRS2033: 9CRS2033NR-00 - Tri-Mode kit-A 600mm - 6NR282Z9HSR-00 (optional) - Tri-Mode kit-B 720mm - 6NR282Z9ISR-00 (optional) - Tri-Mode kit-C 760mm - 6NR282Z9JSR-00 (optional) |
|
| Order Information | ||
| Manufacturer SKU | 6NR282Z97MR-00 (R282-Z97) | |
| System Building | 6NR282Z97MR-00 (R282-Z97) can be configured individually | |