Supermicro AS -F2014S-RNTR | 4 Node AMD EPYC FatTwin 4U Server
Advantages:
- Hyperscale and Hyperconverged Solutions
- HPC and Big Data
- Data Center Enterprise Application
- Scale Out Storage
- Tesco Data Center
- Virtualization Server
special highlight
1x AIOM/AOC NIC card on 4U
- Manufacturer: Supermicro
-
Order number:
1250565
-
Manufacturer SKU:
AS-F2014S-RNTR
Configuration not found? Please use our server request form!
AS-F2014S-RNTR Product Information
Supermicro AS -F2014S-RNTR: High performance 4-Node FatTwin A+ Server with AMD EPYC 7003 Processor up to 8-Bays and with 4x M.2 on 4U
Please note: This barebone is not available individually, but only as a complete system with a minimum configuration. However, the displayed price refers to the barebone without a minimum configuration. Please contact us for an offer of a complete system in your desired configuration.
Mainboard:
Supermicro H12SSFR-AN6
CPU:
Single Socket SP3, AMD EPYC 7003 Series Processors
Up to 64 Cores, supports up to 280W TDP
RAM:
8x DIMM slots, up to 2TB RAM DDR4-3200MHz SDRAM
Octa-channel memory bus
LAN:
Flexible networking via AIOM
1x RJ45 dedicated IPMI LAN port
Expansion Slots:
1x PCI-E 4.0 x16 Low-profile riser
1x PCI-E 4.0 x8 Internal RAID AOC
M.2:
4x M.2, SATA/PCI-E 4.0 x4, Form factor 2242/2260/2280/22110, M-Key
Storage:
Total of 8x 3.5" hot-swap drive bays:
6x SATA (front)
2x SATA/NVMe (rear)
Datasheet for Supermicro AS -F2014S-RNTR
Processor / Chipset (per Node) | |
---|---|
CPU | Single AMD EPYC™ 7003/7002 Series Processor (7003 Series Processor drop-in support requires BIOS version 2.0 or newer) Socket SP3 Supports CPU TDP/cTDP up to 280W* |
Cores | Up to 64 Cores |
Note | Certain CPUs with high TDP may be supported only under specific conditions. |
System Memory (per Node) | |
---|---|
Memory | Memory Capacity: 8 DIMM slots Supports up to 2TB Registered ECC DDR4 3200MHz SDRAM in 8 DIMMs 8-channel memory bus Memory Type: DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs |
Memory Sizes | 8GB, 16GB, 32GB, 64GB, 128GB, 256GB |
Memory Voltage | 1.2V |
Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
On-Board Devices | |
---|---|
Chipset | System on Chip |
SATA | SATA3 (6Gbps) |
Network Controllers | Flexible networking via AIOM (not included, must add 1 per node) |
IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
Graphics | Aspeed AST2600 BMC |
Input / Output (per Node) | |
---|---|
LAN | Flexible networking via AIOM 1 RJ45 dedicated IPMI LAN port |
USB | 2 USB 3.0 ports (rear) |
VGA | 1 VGA port |
Others | 1 COM port 1 TPM 2.0 Header |
System BIOS | |
---|---|
BIOS Type | 256MB SPI Flash EEPROM with AMI BIOS |
Management | |
---|---|
Software | IPMI 2.0 KVM with dedicated LAN SSM, SUM SuperDoctor® 5 Watch Dog |
Power Configurations | ACPI Power Management |
PC Health Monitoring | |
---|---|
CPU | Monitors for CPU Cores, Chipset Voltages, Memory. |
FAN | Fans with tachometer monitoring Status monitor for speed monitoring Pulse Width Modulated (PWM) fan connectors |
Temperature | Monitoring for CPU and Chassis environment Thermal Control for fan connectors |
Chassis | |
---|---|
Form Factor | 4U Rackmount |
Model | CSE-F424AS3-R2K20BP |
Dimensions and Weight | |
---|---|
Width | 17.63" (448mm) |
Height | 6.96" (177mm) |
Depth | 29" (737mm) |
Package | 28.3" (W) x 15.0" (H) x 42.4" (D) |
Weight | Net Weight: 150 lbs (68.04 kg) Gross Weight: 200 lbs (90.71 kg) |
Available Colors | Black |
Front Panel (per Node) | |
---|---|
Buttons | Power On/Off button UID button |
LEDs | Power status LED Hard drive activity LED Network activity LEDs Information LED (UID, Fan failure, Overheat) |
Expansion Slots (per Node) | |
---|---|
PCI-Express (PCI-E) | 1 PCI-E 4.0 x16 (Low-profile riser) 1 PCI-E 4.0 x8 (Internal RAID AOC) |
Drive Bays / Storage (per Node) | |
---|---|
Hot-swap | 8 hot-swap 3.5" drive bays; Front 6 SATA (optional NVMe support), Rear 2 SATA/NVMe |
M.2 | M.2 Interface: 4 SATA/PCI-E 4.0 x4 M.2 Form Factor: 2242, 2260, 2280, 22110 M.2 Key: M-Key |
Backplane | |
---|---|
1 SATA/NVMe backplane |
System Cooling (per Node) | |
---|---|
Fans | 2x 8cm 13.5 RPM middle fans |
Power Supply | |
---|---|
2200W Redundant Power Supplies with PMBus | |
Total Output Power and Input | 1200W with Input 100-127Vac 1800W with Input 200-220Vac 1980W with Input 220-230Vac 2090W with Input 230-240Vac 2200W with Input 220-240Vac (for UL/cUL use only) 2090W with Input 230-240Vdc (for CCC only) |
AC Input Frequency | 50-60Hz |
Dimension (W x H x L) |
76 x 40 x 336 mm |
+12V | Max: 100A / Min: 0A (100-127Vac) Max: 150A / Min: 0A (200-220Vac) Max: 165A / Min: 0A (220-230Vac) Max: 174.17A / Min: 0A (230-240Vac) Max: 183.3A / Min: 0A (220-240Vac) |
5VSB | Max: 1A / Min: 0A |
Output Type | Backplanes (Gold Finger) |
Certification | Titanium Level |
Operating Environment | ||
---|---|---|
RoHS | RoHS Compliant | |
Environmental Spec. | Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity: 8% to 90% (Non-Condensing) Non-operating Relative Humidity: 5% to 95% (Non-Condensing) |
Order Information | ||
---|---|---|
Manufacturer SKU | AS -F2014S-RNTR | |
System Building | AS -F2014S-RNTR configured by Supermicro as Complete System |