R282-Z91 | Gigabyte 2HE Barebone R282-Z91 6NR282Z91MR-00

Vorteile:

Virtualisierung
Cloud Computing
Hyperconverged Storage

besonderes Highlight

PCIe 4.0 ready

2.246,00 € *

zzgl. MwSt. zzgl. Versandkosten

Brauchen Sie Hilfe?
Ihr Ansprechpartner:

Jasmin Lhotak

Vertrieb

+49 (0)4181 235770

Serverkonfiguration anfragen

Hersteller: Gigabyte
Artikel-Nr.:
1248611
SKU:
6NR282Z91MR-00

Wunschkonfiguration nicht gefunden? Nutzen Sie unsere Serveranfrage!

Gigabyte R282-Z91 Bis zu 8x PCIe 4.0 x16 Slots in Ihrem AMD EPYC Server ... mehr

Menü schließen

6NR282Z91MR-00 Produktinformationen

Gigabyte R282-Z91

Bis zu 8x PCIe 4.0 x16 Slots in Ihrem AMD EPYC Server

Mainboard:

MZ92-FS0

CPU:

Dual Sockel SP3, AMD EPYC 7002

Bis zu 64 Kerne, 225W TDP

RAM:

32 DIMM Slots, bis zu 4TB DDR4-3200MHz ECC

Octa-Channel

LAN:

2 RJ45 GbE LAN Ports

1 Management LAN Port

Erweiterungsmöglichkeiten:

Riser Card CRS2027

2x Riser Cards CRS2033

1 OCP 3.0 Mezzanine Slot mit PCI-E 4.0 x16

1 OCP 2.0 Mezzanine Slot mit PCI-E 3.0 x8

1 M.2 Slot, M-Key (2242/2260/2280/22110)

Storage:

24 Hot-swap 2.5“ SAS/SATA Einschübe (vorne)

2 Hot-swap 2.5“ SAS/SATA Einschübe (hinten)

Menü schließen

Datenblatt für Gigabyte R282-Z91

Dimensions (WxHxD, mm)	2U 438 x 87 x 730 mm
Motherboard	MZ92-FS0
CPU	AMD EPYC™ 7002 series processor family Dual processors, 7nm, Socket SP3 Up to 64-core, 128 threads per processor TDP up to 225W, cTDP up to 240W Fully support 280W NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable Compatible with AMD EPYC™ 7001 series processor family
Chipset	System on Chip
Memory	32 x DIMM slots DDR4 memory supported only 8-Channel memory per processor architecture RDIMM modules up to 64GB supported LRDIMM modules up to 128GB supported Memory speed: Up to 3200/ 2933 MHz - Note: Follow BIOS setting and memory QVL list if running 3200 Mhz with 2DPC
LAN	2 x 1GbE LAN ports (1 x Intel® I350-AM2) 1 x 10/100/1000 management LAN
Video	Integrated in Aspeed® AST2500 2D Video Graphic Adapter with PCIe bus interface [email protected] 32bpp
Audio	-
Storage	Front side: 24 x 2.5" SATA/SAS hot-swappable HDD/SSD bays, connected to SAS expander Rear side: 2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays, connected to SAS expander Broadcom SAS35x36R expander Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port Default configuration supports: 0 x SAS/SATA drives SAS card is required to enable the SAS drives Suggested 12Gb/s SAS cards: CRA4448 CRA3338
RAID	-
Peripheral Drives	-
Expansion Slots	Riser Card CRS2027: - 1 x PCIe x8 slot (Gen4 x8), Low profile half-length - 1 x PCIe x8 slot (Gen4 x8), Low profile half-length Riser Card CRS2033: - 1 x PCIe x16 slot (Gen4 x16), FHHL - 1 x PCIe x8 slot (Gen4 x8), FHHL - 1 x PCIe x8 slot (Gen4 x8), FHHL Riser Card CRS2033: - 1 x PCIe x16 slot (Gen4 x16), FHHL - 1 x PCIe x8 slot (Gen4 x8), FHHL - 1 x PCIe x8 slot (Gen4 x8), FHHL 1 x OCP 3.0 mezzanine slot with PCIe Gen4 x16 bandwidth from CPU_0 Supported NCSI function 1 x OCP 2.0 mezzanine slot with PCIe Gen3 x8 bandwidth (Type1, P1, P2) Supported NCSI function 1 x M.2 slot: - M-key - PCIe Gen3 x4 - Supports NGFF-2242/2260/2280/22110 cards - CPU TDP is limited to 225W if using M.2 device
Internal I/O	1 x M.2 slot 1 x USB 3.0 header 1 x COM header 1 x TPM header 1 x Front panel header 1 x HDD back plane board header 1 x PMBus connector 1 x IPMB connector 1 x Clear CMOS jumper 1 x BIOS recovery jumper
Front I/O	2 x USB 3.0 1 x Power button with LED 1 x ID button with LED 1 x Reset button 1 x NMI button 1 x System status LED 1 x HDD activity LED 2 x LAN activity LEDs
Rear I/O	2 x USB 3.0 1 x VGA 2 x RJ45 1 x MLAN 1 x ID button with LED
Backplane I/O	Front side_CBP20O5: 24 x SATA/SAS ports Rear side_CBP2020: 2 x SATA/SAS ports Speed and bandwidth: SATA 6Gb/s or SAS 12Gb/s per port
TPM	1 x TPM header with SPI interface Optional TPM2.0 kit: CTM010
Power Supply	2 x 1600W redundant PSUs 80 PLUS Platinum AC Input: - 100-127V~/ 12A, 47-63Hz - 200-240V~/ 9.48A, 47-63Hz DC Output: - Max 1000W/ 100-127V +12V/ 82A +12Vsb/ 2.1A - Max 1600W/ 200-240V +12V/ 132A +12Vsb/ 2.1A
System Management	Aspeed® AST2500 management controller GIGABYTE Management Console (AMI MegaRAC SP-X) web interface Dashboard JAVA Based Serial Over LAN HTML5 KVM Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.) Sensor Reading History Data FRU Information SEL Log in Linear Storage / Circular Storage Policy Hardware Inventory Fan Profile System Firewall Power Consumption Power Control LDAP / AD / RADIUS Support Backup & Restore Configuration Remote BIOS/BMC/CPLD Update Event Log Filter User Management Media Redirection Settings PAM Order Settings SSL Settings SMTP Settings
OS Supported	Windows Server 2016 ( X2APIC/256T not supported) Windows Server 2019 Red Hat Enterprise Linux 7.6 ( x64) or later Red Hat Enterprise Linux 8.0 ( x64) or later SUSE Linux Enterprise Server 12 SP4 ( x64) or later SUSE Linux Enterprise Server 15 SP1 ( x64) or later Ubuntu 16.04.6 LTS (x64) or later Ubuntu 18.04.3 LTS (x64) or later VMware ESXi 6.5 EP15 or later VMware ESXi 6.7 Update3 or later Citrix Hypervisor 8.1.0
Weight	Net Weight: 18.5 kg Gross Weight: 25.5 kg
System Fans	4 x 80x80x38mm (16,300rpm)
Operating Properties	Operating temperature: 10°C to 35°C Operating humidity: 8%-80% (non-condensing) Non-operating temperature: -40°C to 60°C Non-operating humidity: 20%-95% (non-condensing)
Packaging Dimensions	982 x 588 x 268 (mm)
Packaging Content	1 x R282-Z91 system 2 x CPU heatsinks 1 x Rail kit
Part Numbers	Barebone package: 6NR282Z91MR-00 Spare parts: - Motherboard: 9MZ92FS0NR-00 - Rail kit: 25HB2-3A0202-K0R - CPU heatsink: 25ST1-15320E-J1R - Back plane board_24-port: 9CBP20O5NR-00 - Back plane board_2-port: 9CBP2020NR-00 - Expander board: 9CEP26O0NR-00 - Front panel board: 9CFP2001NR-00 - Fan module: 25ST2-883829-D0R - 4 x NVMe optional kit: 6NR282Z9CSR-00-100 - Power supply: 25EP0-216008-L0S

1248611

6NR282Z91MR-00

6NR282Z91MR-00 Produktinformationen

Gigabyte R282-Z91

Datenblatt für Gigabyte R282-Z91